Performance Plumbing Blog: Archive for June, 2023

3 Reasons Your Toilet Might Be Flushing Slowly and What to Do

Monday, June 19th, 2023

The importance of a toilet that flushes properly cannot be understated until you find yourself in a situation where you’re running late for work one Monday morning and the clog won’t go down. A slow-flushing toilet can be disruptive yet may indicate a more serious matter. Several factors can contribute to this issue, ranging from simple clogs to more significant plumbing problems. Let’s take a look at some of the most common culprits behind a toilet that won’t flush properly.

Partial Clogs

One of the most common causes of a slow-flushing toilet is a partial clog in the drainpipe. Over time, debris, toilet paper, and even foreign objects can accumulate in the pipes, restricting the flow of water. When you flush, the water struggles to pass through the blockage, resulting in a slow or incomplete flush. 

To address this issue, try using a plunger to dislodge the clog. Apply firm, repetitive plunging motions to create suction and dislodge the obstruction. If the clog persists, consider using a plumbing snake or auger to reach deeper into the pipes and remove the blockage.

Low Water Level in the Tank

A second reason for a slow-flushing toilet is a low water level in the tank. The water level should typically be adjusted to reach the fill line marked inside the tank. If the water level is too low, there won’t be enough water for a strong flush.

To fix this, check the water supply valve near the base of the toilet and ensure it is fully open. You can also adjust the float valve or the fill valve to increase the water level in the tank. Consult the manufacturer’s instructions or seek professional assistance if needed.

Faulty Flapper or Flush Valve

A malfunctioning flapper or flush valve can also lead to a slow-flushing toilet. The flapper is responsible for releasing water from the tank into the bowl during flushing, while the flush valve controls the flow of water from the tank. If either of these components is worn out or damaged, they may not open fully, impeding the flush. 

Inspect the flapper and flush valve for signs of wear, cracks, or misalignment. If necessary, replace these parts with compatible replacements, readily available at hardware stores. It is also advisable to clean any mineral deposits or debris that may be affecting their functionality.

Dealing with a slow-flushing toilet in O’Fallon, MO, can be bothersome, but understanding the reasons behind the issue can help you address it effectively. Remember, partial clogs are a common culprit, so use a plunger or plumbing snake to remove any obstructions. Additionally, check the water level in the tank and adjust it as necessary to ensure a sufficient amount for a proper flush. Lastly, inspect and replace any faulty flappers or flush valves that may be impeding the flushing process. 

If these troubleshooting steps do not resolve the problem, seek professional Performance Plumbing assistance to diagnose and fix any underlying plumbing issues!

Continue Reading

Gas Line Repair: What to Expect as a Homeowner

Monday, June 5th, 2023

As a homeowner, encountering a gas line issue can be a cause for concern. Gas line repairs often require immediate attention and should be handled by a qualified Performance Plumbing professional to ensure safety and compliance with local regulations.

Understanding what to expect during the gas line repair process can help you navigate the situation with confidence. Feeling comfortable that you have chosen the right professionals to handle the job can also be a critical element in your satisfaction. Here are some key aspects to consider.

Continue Reading